
Bedrock BTB115 Talkbox Pro
Advanced XLR STIPA Source for Acoustic Consultants
Advanced talkbox for acoustic consultants and large-venue STIPA/STI testing. Balanced XLR output, phantom-powered XLR input, user-defined signal playback and battery operation for untethered field work. Pair with i10 for professional consultant workflows.
About this product
The BTB115 Advanced Talkbox is the professional choice for acoustic consultants and large venue testing. Engineered for demanding acoustic applications, it provides reliable performance and battery operation for efficient field measurements.
Built for Acoustic Consultants
Professional consultants need equipment that fits into a professional signal chain. The BTB115 provides a balanced XLR line output and a phantom-powered XLR input, playback of user-defined and calibrated analogue signals, and battery operation so it can be placed anywhere on site without mains power. The internal 4800 mAh NiMH battery pack gives up to 3 hours of off-grid use; the BTB115 is powered and charged from 12 V through the included external AC adapter, or from a USB-C power adapter.
Recommended STIPA/STI Setup for Consultants
For comprehensive speech intelligibility testing, pair the BTB115 with the Bedrock i10: - **Full STI measurement** (not just STIPA screening) - **Full STI in under 60 seconds** with the i10 - **All modules included** for complete acoustic analysis
Calibrated, Adjustable Vocal Effort
The BTB115 features a high-performance 85 mm full-range driver with an acoustic output adjustable from 54 to 72 dB SPL at 1 metre in 1 dB steps, matching the vocal effort the standard requires. Designed for reliable speech intelligibility and room acoustic measurements, it provides clear and consistent sound reproduction for acoustic consultants, system commissioning, and environmental testing applications.
IEC-60268-16 Compliant
The STIPA test signal meets IEC-60268-16 rev. 4 and rev. 5 requirements. STIPA and full STI signals are played back according to IEC 60268-16 rev. 5 (2020), and noise, STIPA and full STI signals conform to their target spectra within 1 dB at 1/3-octave resolution.
Accurate Set-up
An integrated class 2 laser pointer and laser distance meter (range 0.03–1.50 m) helps place the microphone in front of the talkbox; the SPL at the test position is calculated from the distance. User calibration is supported with the BAMT1 measurement microphone (not included).
Control and Connections
Control the BTB115 from the full-colour 4" LCD touch screen at the back, from the two round 1.8" displays on the front, or wirelessly via WiFi or Bluetooth. A USB-C data connection handles firmware updates, remote control and user uploads, and the phantom-powered XLR line/mic input lets the BTB115 work as a calibrated loudspeaker. Spoken announcements mark the start and end of test sessions in 6 languages (US/UK/FR/SP/GE/DU), each in a male and a female voice. A standard UNC camera thread takes a tripod, and rubber feet on the bottom and back allow forward- or upward-facing use.
Key Features
- 72 dB SPL output
- Up to 3 hours battery operation
- IEC-60268-16 compliant
- STIPA and full STI to IEC 60268-16 rev. 5
- Spectra within 1 dB (1/3 octave)
- Ideal for acoustic consultants
- Laser distance meter (0.03–1.50 m)
- XLR balanced output
- WiFi or Bluetooth control
- Spoken announcements in 6 languages
- UNC tripod thread and rubber feet
- Professional-grade construction
Specifications
| STIPA Signal Standard | IEC 60268-16:2020 (rev. 5), IEC 60268-16:2011 (rev. 4) |
| Test Signals | STIPA and Full STI (IEC 60268-16 rev. 5, 2020), Pink noise, White noise, Sine waves, Frequency sweeps, Playback of user-uploaded signals (calibrated on the fly by the internal DSP), Calibrated playback of analogue signals from line in |
| Spectral Accuracy | Noise, STIPA and Full STI signals within 1 dB of their target spectra (1/3-octave resolution) |
| Spoken Announcements | Start and end of test sessions, 6 languages (US/UK/FR/SP/GE/DU), male and female voice |
| Frequency Range | 80 Hz - 16 kHz (flat within ±1 dB) |
| Acoustic Output | 54 - 72 dB SPL @ 1 m, adjustable in 1 dB steps (vocal effort) |
| Speaker | 85 mm full-range driver |
| Line Output | XLR balanced output (calibrated in dBu) |
| Line Output Level | -30 to -12 dBU, adjustable in 1 dB steps |
| Line Input | Phantom-powered XLR line/mic input; can be used as a calibrated loudspeaker via line in |
| Display | Full-colour 4" LCD touch screen at the back (800x480 pixels); two round 1.8" displays on the front (240x240 pixels, capacitive touch) |
| Laser Distance Meter | Integrated class 2 laser pointer and laser distance meter, range 0.03-1.50 m; SPL at the test position is calculated from the distance |
| Wireless Control | WiFi or Bluetooth |
| Data Connection | USB-C (firmware updates, remote control, user uploads) |
| User Calibration | Supported with the BAMT1 measurement microphone (not included) |
| Battery | Internal 4800 mAh NiMH battery pack, up to 3 hours of off-grid use |
| Power and Charging | 12 V via the included external AC adapter, or a USB-C power adapter |
| Operating Temperature | -10°C to +50°C |
| Dimensions | 180 x 130 x 115 mm |
| Weight | 1.7 kg |
| Mounting | Standard UNC camera thread for tripod use; rubber feet on the bottom and back for forward- or upward-facing use |
Applications
Explore detailed guides for each application area
Industrial PAGA system testing and commissioning
What's Included
Frequently Asked Questions
Common questions about the BTB115 Talkbox Pro



