Bedrock SM90 Class 1 Sound Level Meter - PAGA Testing and Compliance - Class 1 PAGA | Professional Acoustic Measurement
Class 1 PAGA
All Modules Included

Bedrock SM90

Class 1 Analyzer for PAGA and Speech Intelligibility

Full-featured Class 1 sound analyzer with STIPA and full STI (IEC 60268-16 rev. 4 and rev. 5) for PAGA system testing and compliance. Octave analysis, logging, and environmental monitoring included. Pair with the BTB115 Advanced Talkbox for complete Class 1 speech intelligibility testing.

Class 1 to IEC 61672-1
STIPA and full STI (rev. 4 and rev. 5)
Pair with BTB115 for testing
Octave and 1/3 octave analysis
Statistical analysis (L1-L99)
Environmental monitoring
All Modules Included, No Unlock Fees
Made in Netherlands
Factory Calibration Included
Free Firmware Updates

About this product

The Bedrock SM90 combines Class 1 precision SPL measurement with full STIPA and full STI capability (IEC 60268-16 rev. 4 and rev. 5)—the ideal choice for professional PAGA system testing and formal compliance certification.

Class 1 PAGA Testing Solution

For critical installations requiring formal certification, the SM90 + BTB115 Advanced Talkbox provides Class 1 speech intelligibility testing: - IEC 61672-1 Class 1 SPL measurement - IEC 60268-16 compliant STIPA - All modules active from day one - No unlock fees or subscriptions

Complete Capability

The SM90 ships with octave and 1/3 octave analysis, statistical measurements (L1-L99), data logging, environmental monitoring (temperature/humidity), and STIPA—all active and ready. Data is stored on 8 GB of internal storage (at least 7.8 GB for data), and the battery lasts approx. 4 to 6 hours on a single charge, depending on use, recharging from a USB wall charger. Designed and manufactured in the Netherlands, by the inventors of STIPA.

Professional Compliance Testing

When formal certification is required, the SM90 delivers measurements you can document with confidence. Class 1 compliance according to IEC 61672 and ANSI S1.4.

Pair with the BTB115 Advanced Talkbox

The BTB115 supplies the STIPA test signal for PAGA testing, including large venues, high ambient noise and industrial facilities.

Key Features

  • Class 1 to IEC 61672-1
  • STIPA and full STI (rev. 4 and rev. 5)
  • Pair with BTB115 for testing
  • Octave and 1/3 octave analysis
  • Statistical analysis (L1-L99)
  • Environmental monitoring
  • Battery: approx. 4 to 6 hours, depending on use
  • All modules included—no unlock fees

Specifications

Standards ComplianceIEC 61672-1:2014 Group X Class 1, ANSI S1.4 Type 1, IEC 60268-16 rev. 4 (2011) and rev. 5 (2020), IEC 61260:2014 (RTA filters exceed class 1), ISO 3382-2, ANSI S12.2, ISO 1996
Speech IntelligibilitySTIPA and Full STI (IEC 60268-16 rev. 4 (2011) and rev. 5 (2020))
Speech Level MeterIEC 60268-16
MicrophoneBAMT1-MP201, 48 V phantom powered, 1/2" omnidirectional free-field, detachable IEC 61094-4 Type WS rear-vented capsule, alloy housing, nickel diaphragm, Class 1 / Type 1, 16 pF, 50 mV/Pa; works with any 48 V XLR measuring microphone
Microphone Dynamic Range> 146 dB (3% distortion limit)
Microphone CoefficientsTemperature -0.012 dB/°C; pressure at 250 Hz -0.004 dB/kPa
Effective Noise Floor< 25 dB(A) (Class 1 device)
Linear Range (Z-weighted)26-118 dB SPL (low range); 42-124 dB SPL (reference/high range)
Linear Measuring Range30 - 122 dB with the included microphone; electronics > 110 dB (combined ranges)
Environmental SensorsTemperature and humidity
PlatformShared SMxx hardware platform (SM50, SM90); designed and manufactured in the Netherlands, by the inventors of STIPA
Sound Pressure LevelA, C, Z weighting; Slow, Fast, Impulse; Leq, SEL, Max Hold, peak
Statistical AcousticsPercentile levels (L10, L90 and others)
Octave AnalysisReal-time analyzer - 1/1, 1/3, 1/6 and 1/12 octave, filters exceed class 1 (IEC 61260:2014), base 10
LoggingLAEQ long-term monitoring and RTA logging
FFT AnalyzerFFT analyzer for acoustic and electric input signals
Reverberation TimeRT60 (ISO 3382-2) - impulse-response and interrupted-noise methods
Noise CurvesNR, NC, PNC, NCB, RC and RC Mark II
Building AcousticsSound insulation Dn / R' and DnT; SRI / STC; impact sound insulation L'nT and L'nw / L'nTw (firmware 3.2)
Electro-AcousticsOscilloscope, loudspeaker polarity test, electric RTA and FFT
Electric AnalysisAC voltmeter (Vrms, dBU, dBV), fundamental frequency estimation, THD+N
Audio RecordingCalibrated audio recording
THD+N MeasurementSupported
Maximum Permissible SPL155 dB (maximum electric input 30 Vpp)
Upper Limit Peak Range124 dB (highest range, 20 Hz - 20 kHz)
Display3.2" resistive LCD touch screen, full colour, 320 x 240 pixels, 65k colours, luminance typ. 250 Cd/m2
Data Storage8 GB internal storage (at least 7.8 GB for data); accessible from a PC over USB (mass storage mode)
ConnectivityUSB - data download, remote control, USB audio device mode; remote-control API available for third-party applications
BatteryNiMH pack, 4.8 V nominal, typ. 2500 mAh; approx. 4 to 6 hours on a single charge, depending on use; recharging via USB wall charger (international adapters included); max. charge current 1.8 A
Start-Up PeriodReady for measurements 20 seconds after power-up
Operating ConditionsTemperature 5 - 35 °C (41 - 95 °F); relative humidity 0 - 95% non-condensing
EMCEN 61326-1:2006; FCC part 15 class A
MechanicalRear-mounted tripod adapter; hook for carrying cord
DimensionsApprox. 210 x 85 x 55 mm (excluding microphone)
Weight530 g (including microphone)
FirmwareFree firmware updates add functionality

What's Included

SM90 Class 1 Analyzer
Class 1 / Type 1 measuring microphone (1/2" free-field, 48 V phantom powered)
Ruggedised carrying case
World charger (USB wall charger with international adapters)
USB cable
Carrying cord
Quick start guide
Calibration certificate
USB flash drive with test signals and manual
Foam windscreen

Complete kit includes: Rugged hardcase, windscreen, universal power adapter (international plugs), USB cable, calibration certificate, lanyard, a plethora of Excel calculation and reporting sheets, plus Bedrock Studio software. ISO17025 accredited calibration available as an option.

Windows 10 / 11 desktop application

From measurement to report — Bedrock Elite Analyzer

Turn your SM90 measurements into standards-anchored results and branded reports, on your Windows desktop.

  • No serial needed to start — run every module in demo mode.
  • Branded, standards-referenced PDF reports.
  • No add-ons, no per-module fees.
€249

one-time perpetual licence (incl. VAT), tied to your instrument's serial. Buy it online on the Analyzer page, or request an invoice.

Recommended for Class 1 Meters

Complete Your Setup with the BAC3 Class 1 Calibrator

For Class 1 instruments like the SM90, we recommend pairing with a Class 1 acoustic calibrator. Regular field calibration ensures your measurements remain traceable and compliant with IEC standards.

  • Class 1 to IEC 60942
  • 94 dB and 114 dB reference levels
  • ISO17025 accredited calibration available
  • Compatible with 1/2" and 1" microphones
SM90 with BAC3 Calibrator bundle
BOMK00 Outdoor Noise Monitoring Kit - Long-Term Environmental Sound Measurement System
Long-Term Monitoring Solution

Extend Your Reach with Outdoor Monitoring

The BOMK00 outdoor kit transforms your measurement capabilities for sustained, unattended noise monitoring. Perfect for environmental assessments, construction site monitoring, and regulatory compliance surveys.

Week-Long Battery

Up to 7 days off-grid operation

Weatherproof Design

Rain, dust, and impact resistant

Remote Access

Bluetooth and WiFi connectivity

Solar Compatible

Extended deployment with solar panels

Frequently Asked Questions

Common questions about the SM90

What is the Bedrock SM90?
The Bedrock SM90 is a professional Class 1 sound level meter with octave band analysis, statistical analysis, and data logging. It provides the accuracy required for regulatory measurements and environmental noise assessments.
Does the SM90 include octave analysis?
Yes. The SM90 includes real-time octave band analysis, which is essential for frequency-specific noise assessments, building acoustics measurements, and identifying noise sources.
Can the SM90 be used for environmental noise monitoring?
Yes. The SM90 meets IEC 61672 Class 1 requirements and includes statistical analysis (Ln percentiles) and data logging, making it suitable for environmental noise surveys and regulatory compliance measurements.

Ready for SM90?

Request a personalized quote or schedule a live demonstration. Experience what professional measurement looks like without commercial friction.