
Bedrock AM100
Dual-Channel Analyzer for Long-Term Monitoring
Advanced Class 1 dual-channel analyzer for long-term noise monitoring and environmental assessments. Core of the BOMK00 outdoor monitoring kit. Bluetooth and WiFi connectivity for remote access. All modules included.
About this product
The Bedrock AM100 is the heart of professional long-term noise monitoring systems. Dual Class 1 channels, wireless connectivity, and extensive data storage make it ideal for environmental assessments, construction monitoring, and unattended noise surveys.
Long-Term Noise Monitoring
The AM100 is the core analyzer in our BOMK00 outdoor monitoring kit. With 30 GB of internal storage for user data, extensive logging capabilities, and remote access, it's designed for week-long unattended deployments.
Dual-Channel Capability
Two independent Class 1 measurement channels with synchronized sampling. Measure source and receiver simultaneously, calculate transfer functions in real-time, and capture complex acoustic relationships.
Remote Access and Control
Bluetooth and WiFi connectivity enable remote monitoring, data transfer, and configuration. Access your data from anywhere, stream live measurements to your analysis software, or control the device remotely via API.
BOMK00 Outdoor Kit
For weatherproof outdoor deployment, pair the AM100 with our BOMK00 outdoor kit: weatherproof enclosure, high-capacity battery (week-long operation), BOC01 microphone housing, and all necessary accessories.
Specifications
| Standards Compliance | IEC 61672 Group X Class 1, ANSI S1.4 Type 1, IEC 61260 (Class 1), IEC 60268-16 rev. 4, ISO 3382-2, ANSI S12.2, ISO 1996 |
| Input Channels | 2 - rear connector (black) for the measurement microphone, front connector (red) as second simultaneous input channel (e.g. frequency transfer function); selectable in the Settings module |
| Microphone | BAMT1-MP201, 48 V phantom powered, 1/2" omnidirectional free-field, detachable IEC 61094-4 Type WS rear-vented capsule, alloy housing, nickel diaphragm, Class 1 / Type 1, 16 pF, 50 mV/Pa |
| Microphone Dynamic Range | > 146 dB (3% distortion limit) |
| Microphone Coefficients | Temperature -0.012 dB/°C; pressure at 250 Hz -0.004 dB/kPa |
| Frequency Range | 10 Hz - 20 kHz per channel |
| Effective Noise Floor | < 14 dB(A) (LO range, 20 Hz - 20 kHz) |
| Upper Limit Peak Range | 128 dB (HI range, 20 Hz - 20 kHz) |
| Linear Range (mic, Z-weighted) | 24-118 dB SPL (low range); 42-124 dB SPL (high range, reference) |
| Linear Range (electrical XLR, Z-weighted) | 21-122 dBuV (low range); 38-133 dBuV (high range, reference) |
| Maximum Permissible SPL | 155 dB |
| Maximum Electric Input | 30 Vpp |
| Channel Matching | < 0.3 dB @ 1 kHz |
| Transfer Function | Real-time H1, H2, coherence |
| FFT Analysis | 100 Hz - 20 kHz, 800/1600/3200 lines |
| Octave Analysis | Real-time analyzer - 1/1, 1/3, 1/6 and 1/12 octave, Class 1 filters, base 10 (IEC 61260) |
| Speech Intelligibility | Speech Transmission Index - STIPA and Full STI (IEC 60268-16 rev. 4) |
| Speech Level Meter | IEC 60268-16 |
| Sound Pressure Level | A, C, Z weighting; Slow, Fast, Impulse; Leq, SEL, peak |
| Statistical Acoustics | Percentiles |
| Logging | RTA and SPL logging |
| Reverberation Time | RT60 - interrupted noise and impulse methods (ISO 3382-2) |
| Sound Insulation | Sound insulation, SRI and STC |
| THD+N Measurement | Supported |
| Noise Curves | NR (ISO 1996), NC (ANSI S12.2:2008), PNC (Beranek et al 1973 variant, not in ANSI S12.2), NCB (ANSI S12.2:1995), RC (single-number rating with N/H/R/RV spectral classification), RC Mark II. RNC is not implemented. |
| Additional Analysis | Oscilloscope, loudspeaker polarity test, frequency estimation, AC voltmeter (Vrms, dBU, dBV) |
| Frequency Weighting | A, C, Z per channel |
| Display | Capacitive touch TFT, 800 x 480 pixels, 16.7M colours, luminance typ. 400 Cd/m², viewing angle 70°, typical lifetime 20,000 h |
| Connectivity | USB 2.0 (mass storage, audio device mode, remote operation); WiFi for data and recorded-audio transfer and LAN connection; Bluetooth remote control |
| Data Storage | 30 GB internal storage for user data plus 2 GB system partition; accessible from a PC over USB (mass storage mode) |
| Battery | NiMH pack, 4.8 V nominal, typ. 2500 mAh; typical battery lifetime > 4 h; max. charge current 1.8 A |
| Start-Up Period | 8 seconds |
| Operating Conditions | Temperature 5 - 35 °C (41 - 95 °F); relative humidity 0 - 95% non-condensing |
| EMC | EN 61326-1:2006; FCC part 15 class A |
| Mechanical | Rear-mounted tripod adapter; hook for carrying cord |
| Dimensions | Approx. 210 x 85 x 55 mm (excluding microphone) |
| Weight | 600 g (including microphone) |
Applications
Explore detailed guides for each application area
Extended environmental noise monitoring
Unattended noise survey methodology
Construction noise monitoring and compliance
Airport noise monitoring and assessment
Transfer function and spectrum analysis
Source-path-receiver acoustic analysis
Advanced building acoustics research
What's Included
Complete kit includes: Rugged hardcase, windscreen, universal power adapter (international plugs), USB cable, calibration certificate, lanyard, a plethora of Excel calculation and reporting sheets, plus Bedrock Studio software. ISO17025 accredited calibration available as an option.
From measurement to report — Bedrock Elite Analyzer
Turn your AM100 measurements into standards-anchored results and branded reports, on your Windows desktop.
- No serial needed to start — run every module in demo mode.
- Branded, standards-referenced PDF reports.
- No add-ons, no per-module fees.

Extend Your Reach with Outdoor Monitoring
The BOMK00 outdoor kit transforms your measurement capabilities for sustained, unattended noise monitoring. Perfect for environmental assessments, construction site monitoring, and regulatory compliance surveys.
Week-Long Battery
Up to 7 days off-grid operation
Weatherproof Design
Rain, dust, and impact resistant
Remote Access
Bluetooth and WiFi connectivity
Solar Compatible
Extended deployment with solar panels
Frequently Asked Questions
Common questions about the AM100



